Our manager will contact you shortly.
Walnut cracking machine K 50 - small-sized equipment for processing walnuts in small businesses. It possesses the conical principle of cracking, does not require calibration of the walnut, cracks the shell as gently as possible and provides an output of up to 80% of the whole kernel.
From: 133 100 UAHProductivity:
up to 50 kg/hourWhole kernel percentage:
from walnuts up to 80%Engine power:
0.55 kWMaterial:
steelWeight:
85 kgComplete set:
220VDimensions:
90 * 60 * 140 cmWalnut cracking machine K 50 – small-sized equipment for processing walnuts in small businesses. It possesses the conical principle of cracking, does not require calibration of the walnut, cracks the shell as gently as possible and provides an output of up to 80% of the whole kernel.
Advantages of K 50 nutcracker:
The principle of operation of the K 50 nutcracker: a walnut is loaded into the hopper and the nutcracker is started. The chain conveyor picks up the walnut and transfers it to the cracking mechanism. The walnut ends up between the conical plates, falls through according to its size, the plates shrink and the shell cracks, while the kernel remains intact. When the plates are unclenched, the walnut is sent to the unloading compartment.
After cracking, the kernel is cleaned of shells and partitions. This can be done with walnut cracking kit.
*The color or shade of the product in the photograph may differ from the real one.
Shipping cost is NOT included in the price of the item. To find out the cost of delivery to your country, contact the manager. All about the terms of delivery and payment here.
! Declared characteristics may differ when using low-quality raw materials.
* Low-quality raw materials mean:
– walnut affected by disease, mold or rot;
– a nut with a thick shell and partitions that have grown into the core;
– overdried nut (the kernel crumbles during processing);
– wet elastic walnut, which, after splitting, retains its integrity and will not do without manual cleaning.
up to 300 kg/h (depending on the maturity of the nut)
1.1 kW
170 l
steel
for bulk, dusty, granular and small-piece products
15 m³/h
102 х 358 х 173 sm
220/380 V
for food (stainless steel) and non-food products
up to 50 kg/hour
from walnuts up to 50%, from hazelnuts up to 90%
0.18 kW
steel
from 30 m.c.
500 cm.
300 см.
16.16 kW.
